Je nám líto, váš prohlížeč nepodporuje JavaScript!

Control the EV charger via OCPP, get higher self-use rate in solar pv system

Why do we want to control the EV charger from IAMMETER

The reason is described tady

Zisk za jednu kWh exportovanou do sítě může být pouze 1/4 nebo 1/5 ceny elektřiny ve spotřebě energie, nebo i méně.

Společnost IAMMETER vždy hledala řešení, které by zákazníkům pomohlo efektivněji využívat nadbytečný solární výkon.

EV charger is one of the best actuators in this solution because the charging power can be controlled nearly linearly. Based on the reading of the meter on the grid side, you can get the solar excess output, then you can control the charging power , as nearly to the solar excess power as possible.

System structure

smart-EV-nabíječka

Tutorial

Quickstart: connect the EV charger to IAMMETER

Odkaz

Integrace EV-nabíječky do IAMMETER je za rohem.

List the charging history and the solar percentage

Podporujte chytré nabíječky ev a využijte přebytečný solární FV výstup efektivněji

Set the automation strategy ,charge the EV by the solar surplus

Horní